Quantifying Electrochemical Degradation in Single-crystalline LiNi0.8Mn0.1Co0.1O2–Graphite pouch cells through Operando X-ray and Post-mortem Investigations

07 December 2023, Version 2

Abstract

Layered nickel-rich lithium transition metal oxides (LiNixMnyCo1−x−yO2; where x ≥ 0.8), with single-crystalline morphology, are promising future high-energy-density Li-ion battery cathodes due to their ability to mitigate particle-cracking-induced degradation. This is due to the absence of grain boundaries in these materials, which prevents the build-up of bulk crystallographic strain during electrochemical cycling. Compared to their polycrystalline counterparts, there is a need to study single-crystalline Ni-rich cathodes using operando X-ray methods in uncompromised machine-manufactured industry-like full cells to understand their bulk degradation mechanisms as a function of different electrochemical cycling protocols. This can help us identify factors to improve their long-term performance. Here, through in-house operando X-ray studies of pilot-line-built LiNi0.8Mn0.1Co0.1O2–Graphite A7 pouch cells, it is shown that their electrochemical capacity fade under harsh conditions (2.5–4.4 V and 40 °C for 100 cycles at C/3 rate) primarily stems from the high-voltage reconstruction of the cathode surface from a layered to a cubic (rock salt) phase that impedes Li+ kinetics and increases cell impedance. Post-mortem electron and X-ray microscopy show that these cathodes can withstand severe anisotropic structural changes and show no cracking when cycled under such conditions. Comparing these results to those from commercial Li-ion cells with surface-modified single-crystalline Ni-rich cathodes, it is identified that cathode surface passivation can mitigate this type of degradation and prolong cycle life. In addition to furthering our understanding of degradation in single-crystalline Ni-rich cathodes, this work also accentuates the need for practically relevant and reproducible fundamental investigations of Li-ion cells and presents a methodology for achieving this.

Keywords

Single-crystalline Ni-rich cathodes
full-cells
operando X-ray studies
particle cracking

Supplementary materials

Title
Description
Actions
Title
Electronic supplementary materials
Description
Supplementary plots and data
Actions

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.